Large Armchair Slipcover Guide: How To Measure And Fit Oversized Chairs

First, find out the true size of the large armchair

Many people think that they can put on the large single sofa in their home by simply picking out a chair cover that says large. In fact, things are not that simple. In the chair cover category, terms such as large, oversized, tall, high back, overstuffed, and even chair and a half only describe the size of the chair and are not a uniform size standard. For the same chair, family A might be labeled as large, but family B might be classified as standard. So when choosing a cover for a large armchair, the first step is always to measure out the actual size first, don’t just focus on the word large.

Don’t forget these key areas when measuring

When choosing a cover for an armchair, you should write down at least three numbers: overall width, depth, and height. These three alone are not enough. The width and height of the backrest, the width and depth of the seat surface, the length, width and height of the armrests, the size of the seat cushion, and the area that the legs or skirt want to cover should all be measured clearly. The biggest difference between an armchair and a regular armless dining chair is the armrests. Where the armrests cover and how to handle the connection between the armrests and the backrest must be confirmed separately. If it is a curved, special-shaped chair or a chair with special armrests, you also need to write down the shape and the dimensions of several key inflection points, and you cannot just measure a straight line.

Different chair types have different adaptation points

There are many types of chairs, including single chairs, and structural differences can lead to completely different measurement focuses. Before selecting a cover, separate the furniture object, chair back outline, and seat shape to confirm, and then look at the armrests, seat surface, and bottom structure.

Chairs without armrests don’t save you any trouble. Large Armless Chair Slipcover: Focus on recording the width and height of the backrest, the width and depth of the seat surface, the height of the entire chair, and the extent to which the legs or bottom should cover. If it’s a more decorative armless chair, the large armless accent chair slipcover tends to have more personality in the contours of the back and seat, measuring against the actual shape.

Wingback chairs are another type of chair that requires special care. It has an outward-extending wing on each side of the backrest, and the cover will look tight and prone to slipping if it is not fully covered by the wings on both sides. Large wingback chair slipcover To supplement the measurement along the back profile, at the widest point, the height and width of the wings should be recorded separately. The nearby large wing chair slipcover also needs to check the armrests and backrest together to confirm the specifications according to the actual width.

Bucket chairs and round chairs are the most prone to misjudgment. The large barrel chair slipcover faces an arc-shaped backrest and cannot be covered as a normal rectangle. You need to measure the highest point, widest point, bottom width of the backrest, as well as the width and depth of the seat surface along the curve. For round-backed or domed chairs like the large round cuddle chair slipcover, focus on the arc profile of the backrest or upper edge. The seat surface and the entire chair may not be round, and the length of the curve at the upper edge of the arc must also be measured separately.

Large slipper chair slipcover and large club chair slipcover are also common types in single chairs. When selecting a cover, the back, armrests, seat surface and bottom structure must be confirmed separately, especially the presence or absence of armrests and the width and depth of the seat surface. The specifications will be determined after accurate measurement.

Ultimately, under the broad category of large chair slipcovers, each chair has a different shape. Record the chair shape, backrest profile, and seat shape separately so that there is no situation where the cover is completely different.

The fixing method determines the final fit

If the size is correct, it also depends on what the cover is fixed on. Common chair cover designs include elastic fit, seat cushion and body split, as well as protective furniture covers. The fastening method may be elastic, Velcro, straps, zippers, or foam fastening strips, skirts, D-rings and other structures. The fasteners that fit different chair types are different. Please check them clearly before placing an order, and they will not be easily moved after installation.

Daily care makes chair covers more durable

Whether the chair cover can last long or not is taken care of by most of the time. The specific method of washing and whether it can be machine washed must be based on the label that comes with the product. You can vacuum regularly every day to dry stains as soon as possible, and avoid being exposed to direct sunlight for a long time. The fabric will not fade easily and the cover can be used for several more years.